Measuring multiple key water quality parameters including UV254, colour and turbidity using an in-pipe setup
The ability to measure multiple drinking water parameters in a network relies on in-pipe installation, in this case study the i::scan is used to measure UV254, colour and tubidity to do just that.
A series of 35mm i::scan’s were setup in a grid across a network to measure UV254, TOC, colour and turbidity. The i::scan sensors were combined with a concube terminal and utilised the moni::tool software to send the real-time data back to a central database for analysis and event detection.
The in-pipe sensors use a unique fixture that can withstand pressure up to 10 bar and has a separate valve to close the connection to the mains. This enables the i::scan to be taken out of the pipe for inspection or cleaning, without interfering with the flow of the water through the network.
i::scan in-pipe
installation
Watch a video about the i::scan’s water quality monitoring capabilities.
Play Video
Play Video
”Measuring SAC-254, turbidity and TOC simultaneously will set new standards in On-Line water quality monitoring networks.
Alejandro SchnyderCEO of Aqua Innovation
View the results below.
Click Here Knowledgeable, experienced staff.Need some advice or support? We’re here to help.
If you need a call back about how Process Measurement and Analysis can help you or have any questions at all please feel free to contact us at sales@pma.uk.com. A member of our experienced team will contact you directly.